M5/M6 Front Mount Intake Intallation

Tips for Installation of Front Mount Intakes:

(See pics below for visual reference)

- Each side inside the grills needs to be trimmed To allow for piping clearance after the oem channels are removed.

- The pipes fit very snugly in the channel, and it is very likely they will get mildly scratched during installation. However, this is normal as this is the largest piping diameter that will fit. 

-There is 1 bolt in the top core support for the oem channel that will need to be removed. This is easiest looking down from the core support.
-The factory air box and factory ducts in the channel must be removed.

Remove the screw, then just pull it out!